Dell UPS 10000R - Manual (Page 40)

40 |
Configuring the Card
Shutdown Parameters
Click Shutdown Parameters from the menu bar to view and configure UPS operating parameters in
battery mode and for power restoration (see Figure 24).
Figure 24. Shutdown Parameters Page (Advanced Parameters Shown)
Click Show advanced parameters to display additional parameters for adjusting specific thresholds
related to the percentage of remaining battery charge level.
The Output column allows each receptacle to be named (maximum 20 characters).
Since priority is given to the main receptacle , the card cannot supply power to the load segments when
the main receptacle power is off.
NOTE: For security purposes, the administrator must click Save and enter the admin user name and password
to save modifications or run commands. The default user name and password are both admin.