Dell OptiPlex 9010 All In One (Mid 2012) - Manual (Page 38)

l) power-supply fan
m) power supply unit
n) heat-sink assembly
o) processor fan
p) speakers
q) antenna module
r) system board
NOTE: The display panel should be disassembled in a clean-room environment.
3. Remove the LVDS cable by pressing the latch inwards and disconnecting it from the connector. Remove any other
cables or antennae around the edges of the base panel.
4. Remove the screws that secure the chassis to the middle frame. Lift the chassis off the middle frame.
5. Peel off the tape that adheres the connectors to the display panel.
38