Dell OptiPlex 9010 All In One (Mid 2012) - Manual (Page 62)

Option Description
• Bluetooth
Table 22. Maintenance
Option Description
Service Tag Displays the service tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option
is not set by default.
SERR Messages Controls the SERR message mechanism. Some graphics cards require that the SERR
message mechanism be disabled.
• Enable SERR Messages (selected by default)
Table 23. Image Server
Option Description
Lookup Method Specifies how the ImageServer looks up the server address.
• Static IP
• DNS (selected by default)
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer.
ImageServer IP Displays the primary static IP address of the ImageServer with which the client
software communicates. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Lookup
Method is set to Static IP.
ImageServer Port Allows you to specify the primary IP port of the ImageServer, which is used by the
client to communicate. The default IP port is 06910.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer.
Client DHCP Specifies how the client obtains the IP address.
• Static IP
• DHCP (selected by default)
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer.
Client IP Displays the static IP address of the client. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Client DHCP is
set to Static IP.
62