Dell OptiPlex 9010 All In One (Mid 2012) User Manual
Page 49
Option
Description
Strong Password
Enable strong password - This option is disabled by default.
Password Configuration
This field controls the minimum and maximum number of characters allowed for the
admin and system passwords.
•
Admin Password Min
•
Admin Password Max
•
System Password Min
•
System Password Max
Password Bypass
Allows you to bypass the System Password and the internal HDD password prompts
during a system restart.
•
Disabled (selected by default) — Always prompt for the system and internal
HDD password when they are set.
•
Reboot Bypass — Bypass the password prompts on restarts (warm boots).
NOTE: The system will always prompt for the system and internal HDD
passwords when powered on from the off state (a cold boot). Also, the system
will always prompt for passwords on any module bay HDDs that may be present.
Password Change
Allows you to determine whether changes to the system and hard disk passwords are
permitted when an administrator password is set.
•
Allow Non-Admin Password Changes (selected by default)
TPM Security
This option lets you control whether the Trusted Platform Module (TPM) in the system
is enabled and visible to the operating system.
TPM Security (selected by default)
NOTE: Activation, deactivation, and clear options are not affected if you load the
setup program's default values. Changes to this option take effect immediately.
TCM Security
Allows you to enable or disable TCM security.
TCM Security (selected by default)
NOTE: Activation, deactivation, and clear options are not affected if you load the
setup program's default values. Changes to this option take effect immediately.
Computrace
This field lets you activate or disable the BIOS module interface of the optional
Computrace Service from Absolute Software.
•
Deactivate (selected by default)
•
Disable
•
Activate
Chassis Intrusion
This field controls the chassis intrusion feature.
•
Disable
•
Enable (selected by default)
•
On-Silent
CPU XD Support
Allows you to enable or disable the execute disable mode of the processor.
49