Dell OptiPlex 9010 All In One (Mid 2012) - Manual (Page 55)

Option Description
• Memory Information — Displays Memory
Installed, Memory Available, Memory Speed,
Memory Channels Mode, Memory Technology,
DIMM A Size, and DIMM B Size .
• PCI Information — Displays SLOT1.
• Processor Information — Displays Processor
Type, Core Count, Processor ID, Current Clock
Speed, Minimum Clock Speed, Maximum Clock
Speed, Processor L2 Cache, Processor L3 Cache,
HT Capable, and 64-Bit Technology .
• Device Information — Displays SATA-0, SATA-1,
LOM MAC Address, Video info, Audio Controller,
Modem Controller, Wi-Fi Device, Cellular Device,
and Bluetooth Device.
NOTE: Due to an amount of memory being assigned
for system use, “Memory Available”, is less than
“Memory Installed”. Note that certain operating
systems may not be able to use all the available
memory.
Boot Sequence This list specifies the order that the BIOS searches
devices when trying to find an operating system to boot.
The boot devices can also be selected or de-selected
from the list using the check boxes on the left hand side.
• Diskette Drive
• UEFI: HDD
• Legacy HDD
• Onboard NIC(IPV
• USB Storage Device
• Onboard NIC(IPV6
• CD/DVD/CD-RW Drive
• Onboard NIC (Portables enables, Desktop
disables)
Boot List Option
• Legacy
• UEFI
Advanced Boot Options Enable Legacy Option ROM
Date/Time This option controls the system date and time. Changes to
the date and time take effect immediately.
• MM /DD /YY
• HH: MM: SS: A/P
Table 14. System Configuration
Option Description
Integrated NIC This option controls the on-board LAN Controller.
55