Dell OptiPlex 9010 All In One (Mid 2012) - Manual (Page 47)

Option Description
• CD/DVD/CD-RW Drive
• Onboard NIC (Portables enables, Desktop
disables)
Boot List Option
• Legacy
• UEFI
Date/Time This option controls the system date and time. Changes to
the date and time take effect immediately.
• MM /DD /YY
• HH: MM: SS: A/P
Battery Information Displays each battery graphically with the percent
charged, charging state, Health, and AC adapter
information.
Table 3. System Configuration
Option Description
Integrated NIC This option controls the on-board LAN Controller.
• Disabled — The internal LAN is off and not visible top the operating system.
• Enabled — The internal LAN is enabled.
• Enabled w/PXE (selected by default) — The internal LAN is enabled (with
PXE boot).
• Enabled w/ImageServer — The internal LAN is enabled (with ImageServer
boot).
SATA Operation This option configures the operating mode of the integrated SATA hard drive
controller.
• Disabled — SATA controllers are hidden.
• ATA — SATA is configured for ATA mode.
• AHCI (selected by default) — SATA is configured for AHCI.
• RAID On — configured to support RAID mode (Intel Rapid Restore
Technology).
Drives This option lets you enable or disable various drives on board. By default the options
are enabled.
• SATA-0
• SATA-1
SMART Reporting This field controls if the hard drive errors for the integrated drives are reported
during system startup. This technology is part of the SMART (Self Monitoring
Analysis and Reporting Technology) specification.
• Enable SMART Reporting - This option is disabled by default.
47