Two Brothers Racing Can-Am Spyder Renegade 800 - Manual (Page 3)

ITBR001-256 www.twobros.com 2006-09 Outlander 800/2007-10 Renegade 800 - 3
Figure A
Figure B
Figure C
3. Using the supplied velcro, secure the Juice Box Pro to the underside of the airbox
cover as shown in Figure B.
Make sure to clean both surfaces with the alcohol swab before attaching.
Note: Figure B shows the Juice Box Pro in the general location of the install. Place
the unit above this location.
4. Route the Juice Box Pro wiring harness to the right side of the ATV.
5. Unplug the stock wiring harness from the rear injector as shown in Figure C.
air box
cover
remove
unplug stock
harness
1. Remove the seat.
2. Remove the right hand side covers as shown in Figure A.