Two Brothers Racing Honda CBR600 F4i User Manual
Page 3
ITBR001-04 www.twobros.com
2001-2006 Honda CBR600 F4i - 3
Fig. A
Fig. B
Fig. C
4
Attach the connectors from the Juice Box Pro to the stock connectors as
shown in Figure B.
5
Route the Juicebox Pro harness to the inside of the frame and go towards the
battery.
The fuel tank may need to be lifted up to route the harness properly.
unplug this
connector
Juice Box Pro
connectors
pins
stock connectors
6
Locate the negative side of the battery by lifting up the ECU and removing the
pins that hold the battery cover down (Fig. C).
1
Remove the main seat and the passenger seat.
2
Remove the black left hand inner fairing panel (this panel surrounds the gauges
down to the fuel tank).
3
Unplug the connector as shown in Figure A.
This connector may be located under the rubber flap.
Note: There is another connector located under the fuel tank near the rear
shock. DO NOT plug the Juice Box Pro connectors into this area.