Two Brothers Racing Honda CRF450R User Manual
Page 3
Advertising
ITBR001-234 www.twobros.com
2009-2010 Honda CRF450R - 3
Figure A
Figure B
Figure C
5. Attach the connectors from the Juice Box Pro to the stock injector and the stock
wiring harness as shown in Figure B.
6. Locate the Throttle Position Sensor (TPS) connector.
The TPS connector is located on the left hand side of the throttle body to the
inside of the frame.
Note: The MAP sensor uses this same connector and is located on top of the
throttle body. Make sure you do NOT connect to the MAP sensor.
7. Unplug the TPS connector as shown in Figure C.
unplug
unplug TPS
connector
1. Remove the seat.
2. Remove the fuel tank.
3. Remove the left hand side radiator cover
4. Unplug the stock wiring harness from the injector as shown in Figure A.
Advertising