Two Brothers Racing Honda VFR1200 - Manual (Page 5)

ITBR001-287 www.twobros.com 2010 Honda VFR1200 - 5
Figure G
Figure H
TPS
13. Locate the stock O2 sensor connectors.
The stock O2 connectors are located to the inside of the frame on the left side
of the bike as shown in Figure G. It may make it easier to remove the radiator
mounting bolts to access these connections.
14. Unplug the stock O2 sensors from the stock wiring harness as shown in Figure H.
There is a blue connection and a black connection.
15. Plug the supplied Juice Box Pro O2 Optimizers into the stock wiring harness.
The stock O2 sensors will no longer be connected to anything.