Two Brothers Racing Polaris RZR 900 User Manual
Page 3
Advertising
ITBR001-309 www.twobros.com
2011 Polaris RZR XP900 - 3
Figure A
Figure B
4. Remove the coil pack mounting bolt.
5. Install the bolt fi rst through the Juice Box Pro ground wire and then reattach the
bolt.
6. Unplug the subconnectors from each injector.
There is a grey connector and a black connector located near the rear, left side of
the vehicle. This is located to the left of the air box.
Figure C
bolt
1. Remove both seats.
2. Remove the plastic panel behind the seats.
3. Using the supplied velcro, secure the Juice Box Pro to the panel next to the ECU.
Make sure to clean both surfaces with the alcohol swab before attaching.
Advertising