Two Brothers Racing Suzuki Gladius User Manual
Page 4
Advertising
ITBR001-262
2009-10 Suzuki Gladius - 4
Fi
gu
re
D
Fi
gu
re
E
Fi
gu
re
F
stock
connector
stock
connector
Juice Box Pro
connector
Juice Box Pro
connector
unplug
9
Attach the Juice Box Pro connectors to the stock wiring harness and the injectors as
shown in Figure D.
Connect the orange wires from the Juice Box Pro to the front cylinder and stock
brown connector.
Connect the yellow wires from the Juice Box Pro to the rear cylinder and stock grey
connector.
10 Locate the throttle position sensor (TPS) connector.
The TPS connector is located on the left side of the throttle body.
11 Unplug the connector from the TPS as shown in Figure E.
12 Attach the Juice Box Pro connectors to the TPS connector and stock wiring harness
as shown in Figure F.
Advertising