Two Brothers Racing 2008-10 Suzuki LTR450 User Manual
Page 3
ITBR001-151-A
2008-10 Suzuki LTR450 - 3
Fi
gu
re
A
Fi
gur
e B
Fi
gu
re
C
unplug TPS
connector
unplug
Juice Box Pro
connectors
stock
connector
ground bolt
ground wire
The ignition must be turned OFF before installation.
1
Remove the seat.
2
Remove the plastic shroud around the fuel tank.
3
Lay the Juice Box Pro in the tail section.
4
Route the wiring harness from the Juice Box Pro towards the throttle body.
5
Unplug the stock wiring harness from the injector and the throttle position sensor
(TPS) as shown in Figure A.
6
Attach the connectors from the Juice Box Pro to the stock wiring harness and the
fuel injector as shown in Figure B.
7
Attach the connectors from the Juice Box Pro to the stock wiring harness and the
TPS.
8
Attach the ground wire from the Juice Box Pro to the common ground on the left
hand side of the engine as shown in Figure D.
Follow the stock wiring harness.