Two Brothers Racing Suzuki RMZ250 - Manual (Page 4)

ITBR001-267 www.twobros.com 2010 Suzuki RMZ250 - 4
Figure D
Figure E
7. Locate the Throttle Position Sensor (TPS) connector.
The TPS is a grey 3-pin connector located on the right side of the throttle body as
shown in Figure D.
8. Unplug the TPS connector.
9. Attach the connectors from the Juice Box Pro to the stock TPS connectors as
shown in Figure E.
10. Using the supplied zip tie, secure the harness away from the exhaust.
11. Remove the bolt securing the stock ground wire on the right side of the bike as
shown in Figure F.
12. Reinstall the bolt fi rst through the Juice Box Pro ground wire then through the
stock ground wire.
13. Secure the bolt in the original location.
14. Use the stock zip ties to secure the Juice Box Pro ground wire in place.
15. Reinstall the fuel tank.
16. Reinstall the seat.
Figure F
unplug
ground wire