Two Brothers Racing Yamaha FZ-1 - Manual (Page 3)

ITBR001-150A www.twobros.com 2009-2010 Yamaha FZ1 - 3
Figure A
Figure B
Figure C
6. Attach the connectors from the Juice Box Pro to the stock wiring harness as
shown in Figure B.
7. Remove the bolt on the left hand side of the fuel tank bracket.
8. Loosen the bolt on the right hand side of the fuel tank bracket enough to route
the Juice Box Pro harness underneath it as shown in Figure C.
9. Re-tighten the bracket.
unplug
Juice Box Pro
harness
bracket
1. Remove the main seat and the passenger seat.
2. Prop the front of the fuel tank in the up position.
3. Temporarily lay the Juice Box Pro in the tail section.
4. Route the Juice Box Pro harness under the tail section and go towards the front
of the bike.
5. Locate the grey connector from the main wiring harness to the injector rail and
unplug this connector as shown in Figure A.