Two Brothers Racing Yamaha YFZ450 - Manual (Page 3)

ITBR001-243 2009-10 Yamaha YFZ450 - 3
Fi
gu
re
A
Fi
gur
e B
Fi
gu
re
C
remove
Juice Box Pro
harness
unplug
The ignition must be turned OFF before installation.
1 Remove the seat.
2 Remove the side covers as shown in Figure A.
3 Remove the fuel tank.
4 Temporarily lay the Juice Box Pro in the tail of the quad.
5 Route the Juice Box Pro harness from the rear of the quad to the throttle body going
along the left hand side of the frame.
6 Route the harness underneath the frame crossover as shown in Figure B.
7 Unplug the stock wiring harness from the injector as shown in Figure C.