Using alternate power sources, Using the house current, Warning – Sony DCR-VX700 User Manual
Page 20: Precaution, Using a car battery
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Alternate Power Sources
Using the House Current
To use Uu' supplied AC' power adaptor:
(
1
)
tJonnect the power cord to a wall outlet.
(2)
Connect the camcorder and the AC power adaptor using the supplied connecting cord.
You can charge the battery inserted in the camcorder by connecting the AC power adaptor to the
camcorder and turning the pow'er switch to OFF.
Charging time of the supplied NP-720 battery pack is approx. 150 minutes. While charging, the battery
indicator appears in the display window:
|-1 , iJ ♦
^ igpj ^
After charging finishes, the indicator disappears. You can also charge two batteries at a time by
installing the battery pack and connecting the AC power adaptor. It takes about 4 hours to charge the
batteries.
WARNING
Power cord must only be changed at qualified service shop.
Precaution
The set is not disconnected from the house current as long as it is connected to the wall outlet, even if
the set itself has been turned off.
Notes on the POWER lamp
• The POWER lamp will remain lit for a while even if the unit is unplugged after use. This is normal.
• If the POWER lamp does not light, disconnect the power cord. After about one minute, try again.
Using a Car Battery
Use the DC-V515 pack (not supplied). Connect the cord of the DC pack to the cigarette lighter socket
of a car (12 V or 24 \'). Connect the DC pack in the same wav as the AC power adaptor.
Use the connecting cord supplied with this camcorder.
20
I