To edit more scenes, To stop editing, For fine synchro-editing function – Sony DCR-VX700 User Manual
Page 43: Note on editing when using the av connecting cable, If your vcr is a monaural type
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
starting Editing
(
1
)
Insert a blank tape (or a tape yon ivant to record o\ er) into the recording VCR. Then insert your
recorded tape intcTthe camcorder,
(2) Play back the recorded tape on the camcorder until you locate the point where you want to start
editing. Then set the camcorder to playback pause mode.
(3) Set the recording VCR to recording pause mode.
(4) Press II on the camcorder and VCR simultaneouslv to start editing.
To Edit More Scenes
Repeat steps 2 to 4.
To Stop Editing
Press STOP □ on the camcorder and VCR.
For fine synchro-editing function
You can edit precisely by connecting a control cable to the LANC jack of this camcorder and other v'ideo
equipment having fine synchro-editing function.
Note on editing when using the AV connecting cable
Press DISPLAY on the Remote Commander while editing onto another tape to turn off the display indicators.
Otherwise, the indicators will be recorded on the tape.
If your VCR is a monaural type
Connect only the white plug for audio on both the camcorder and the VCR. With this connection, the sound
is monaural.
Notes on editing when using the DV connecting cable
• You can connect one VCR only.
• Connect the LANC jacks when controlling this camcorder from another VCR for editing.
• If you record playback pause picture via the DV jack, the recorded picture becomes rough.
45