Releasing the steady shot function, To activate the steady shot function again, Notes on the steady shot function – Sony DCR-VX700 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Releasing the Steady Shot Function
When
you
shoot, the '(0)' indicator appears in the viewfinder. This indicates that the Steady Shot
function is \vorking and the camcorder compensates for camera-shake.
You can release the Steady Shot function such as when shooting stationary object with a tripod.
(
1
)
Slide OPEN and open the battery cover.
(2) Set STEADY SHOT to OFF so that the «0>> indicator disappears.
E
II
iy
To activate the Steady Shot function again
Set STEADY SHOT to ON to display the 'O' indicator.
Notes on the Steady Shot function
• The Steady Shot function will not correct excessive camera-shake.
• The Steady Shot function becomes less effective when using a teieconversion lens (not supplied) or wide
teleconversion lens (not supplied).
40