Searching the recorded picture, To stop searching, Notes on searching – Sony DCR-VX700 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Searching the Recorded Picture
Searching the recorded picture without using cassette memory
(1) Turn (lie POWER switch to VTR.
(2) SeUhe SEARCH to OFF in the menu system.
(3) Press SEARCH SELECT on the Remote Commander to select DATE or PHOTO.
(4) Press IKM for backward or >011 for forward on the Remote Commander to select the desired
picture.
Each lime you press KM or C>011, the camcorder searches for the next scene.
To stop searching
Press DSTOP.
Notes on searching
• The camcorder may not search for the recorded picture correctly if the recorded tape has blank portions
between pictures.
• Be sure to install the lithium battery when you use the cassette with cassette memory.
• The camcorder may not search if the beginning of the search portion is too close to the tape head position.
• When you use date search, the camcorder plays back the search picture, and when you use photo search,
the camcorder enters playback pause at the point.
42