To change the end point – Sony DCR-VX700 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

To change the end point

Press ZERO SET MEMORY so that "ZERO SET MEMORY'
Repeat steps 2 to 4.

disappears.

Notes on editsearch
• The picture may be distorted at the end of the inserted portion when it is played back.

• Zero set memory may not function when there is a blank portion on a tape.
• You can re-record without using the ZERO SET MEMORY. Skip steps 2 and .2. Press STOPD to stop

recording.

To use the insert recording repeatedly
Start from step 1 each time.

27

Advertising
See also other documents in the category Sony Camcorders: