Charging and inserting the battery pack, Charging the battery pack – Sony DCR-VX700 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
Charging and Inserting the Battery Pack
Before using your camcorder, you first need to charge and install the battery pack. To charge the
battery pack, use the supplied AC power adaptor.
Charging the Battery Pack
Charge the batterv pack on a flat place without vibration.
(
1
)
Connect the AC power adaptor to a wall outlet.
(2) Align the surface of the battery pack indicated by the ► mark with the edge of the terminal shutter
of the AC power adaptor. Then fit and slide the battery pack in the direction of the arrow.
The CHARGE lamp (orange) lights up. Charging begins.
When charging is completed, the CHARGE lamp goes out. Unplug the unit from the wall outlet, then
remove the battery pack and install it on the camcorder.
Charging Time
Battery Pack
Charging time*
NP-720 (supplied)
190
Approximate minutes to charge an empty pack using the supplied AC power adaptor (Lower
temperatures require a longer charging time.)
fj
M
оfe