To return to automatic white balance mode – Sony DCR-VX700 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the White Balance
(1)
Set HOLD/AU IO LOCK selector to (he center i.uito U
h
L release) position u’hile the camcorder is in
Standby mcxic.
(2) Press WI IT BAL repeatedly to select the appropriate white balance mode.
Each time you press the button, the indicator inside the \ iewfinder changes:
HOLD (outdoor) -6c (indoor) -4 No indicator (auto)
To return to automatic white balance mode
Set HOLD/AUTO LOCK selector to AUTOLOCK or press WHT BAL repeatedly until no indicator
appears in the viewfinder.
Notes on white balance
• When you shoot with studio lighting or video lighting, use the -,6c (indoor) mode.
• When you shoot with fluorescent lighting, use automatic white balance mode. If you use the mode,
white balance may not be adjusted appropriately.
Shooting when the lighting condition changes
• When you adjust the exposure (iris) manually, and niove from indoors to outdoor or vice-versa, set
HOLD/AUTO LOCK selector to AUTO LOCK, then set it to the center position again.
• When you move from indoors to outdoors or vice-versa, or detach the battery for replacement while
shooting in automatic white balance mode, point the camcorder at a white subject about 10 seconds before
you start recording.
■ I
n
‘■1
M
rl
'I
39