E-recoraing a picture in recorded tape – Sony DCR-VX700 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
e-recoraing a Picture in
Recorded Tape
I
You can re-rocord a scene in (lie middle of a recorded tape by sotting the starting [a] and ending [b]
points. The previously recorded portion will be erased.
(1) Kress START/STOP while recording.
The camcorder enters Standby mode.
(
2
)
Hold down the +(forward) or -(reverse) side of EDITSHARCH until the camcorder ^oes to (he
point where you want to end the insertion.
The camcorder enters Standby mode again
[b].
(3) Press ZERO SET MEMORY.
The counter is reset to "0:00:00". "ZERO SET MEMORY" flashes, and the ending point is stored in
memory.
<4) Hold down the - side of EDITSEARCH until the camcorder goes back to the point where you want
to start the insertion [a].
The camcorder enters Standby mode again.
(5) Press START/STOP to start re-recording.
The insert recording stops automatically at the counter zero point, and the camcorder enters Standby
mode again. Zero set memory resumes automatically.
26