About the id of the remote commander, When the beep is set to off in the menu system, Identifying the parts – Sony DCR-VX700 User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
identifying the Parts
About the ID of the Remote Commander
You c<in
ronitito ciintrol mis(iporation t'mm othor VC.'Ks bv setting; the \'TI\^/lD/I iOLD sok'ctor
(o 10.
11
.S
0
tin’ suppiu'd KonioU' Ct>mnmndor when \'ou sel ilie VTR-i/IÎ’)/hR')I O selector to ID. When
YOU ii'>e Keiru^te Cojoin.inder for the first time, you need register the ID ns follows:
(1)
Slide OPbN; and open the battery cover.
(
2
)
Press V1P\U to display the menu in the \ ieu'fmder.
(3)
I’ress f or 4- to seleel COMMANDER, then press EXECUTE.
(4)
IVess t or 4 to seleel ID SET.
(5)
Set the VTR4/ID/I lOl.D selector on the Remote Commander to ID
(6) Press STOP on the Remote Commander.
Alter the beep) sound, the ID of the Remote Commander is registered, and the COMMANDER is set to
ID in the menu system.
(7)
Press MtiNILi to erase the menu display.
When the BEEP is set to OFF in the menu system
The beep does not sound at stop 6.
68