Tv only, Optional connections – Sony SAT-A4 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TV Only
TV With RF Connector Only
Your VHF/UHF IN jack jnay be labeled as
RFIN.
Refer to the illustration below.
»1
Connect the RG-6 cable frcTm the Satellite Antenna's LNB to the
Digital Satellite Receiver's SATELLITE IN jack.
2
Connect the Digital Satellite Receiver's VHE(SAT)/UHE OUT jack
to the TV's VHF/UHF IN jack.
Note
A VHF/UHF connection does not provide stereo sound. To receive stereo
sound, you must use an A/V connection (described on page 13).
3
Connect one end of the telephone line cord to the Digital Satellite
Receiver's TEL LINE jack. Connect the other end to your home's
modular telephone outlet. Do not connect to a "wireless"
telephone extension. Since these devices typically do not support
high data rates, connecting to one may result in very slow
operation or may even prevent connection with your program
provider.
4
Connect one end of the AC power cord to the Digital Satellite
Receiver's AC IN jack. Connect the plug end to an AC outlet.
Digital Satellite Receiver
Optional Connections
□ If you have a cable input, cable box, or a terrestrial TV antenna,
connect it to the Digital Satellite Receiver's VHF/UHF IN jack.
□ You can also connect the Digital Satellite Receiver to your audio
receiver's AUDIO IN jacks using audio cables.
12