Using basic functions, Remote control for model sat-a4, Sat power button – Sony SAT-A4 User Manual
Page 7: Function buttons, Pip buttons, 9 and enter buttons, Guide button, Category button, Index button, Joystick/-*- button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 2
Using Basic Functions
You can start watching programs using just a few buttons on the
remote control. Here's an overview of the buttons you'll use most
often.
Remote Control for Model SAT-A4
POSITION AUDIO SWAP
O Q CD C£> CD
CH OFF
CD O
TV/VIDEO TV.'SAT
jump
FAVORITE
CD» CD
CD CD
s
SAT POWER Button
Turns the Digital Satellite Receiver on and off.
FUNCTION Buttons
Selects the component (SAT, TV, CABLE) that you want to operate.
These buttons flash to indicate which component the remote control
is set to operate. To switch from the TV to SAT mode, press the
SAT FUNCTION button, and then press the TV/SAT button. To control
your TV or cable box, you must first program the remote control, as
described on page 8.5.
PIP Buttons
Control the Picture-In-Picture functions of your Sony TV (see page 81).
0-9 and ENTER Buttons
Pressing the 0-9 buttons and then the ENTER button selects a
station number directly.
GUIDE Button
Press to display the Custom Guide.
CATEGORY Button
Press to display the Category Guide.
INDEX Button
Press to display the Station Index.
CH/PAGE Buttons
Changes the channel. When a program guide is displayed, pressing
the CH/PAGE buttons pages through the guide.
Joystick/-*- Button
Moving the joystick up, down, left, right, and diagonally scrolls
through the program guides. Pressing the -♦- button selects the
program that's highlighted.
See Also
□ Pages 9-10 for a quick start to using the program guide and the
Station Index.
□ Pages 81-83 for a complete description of the buttons on the
remote.