Sony SAT-A4 User Manual
Page 80
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Back Panel (SAT-B3)
Connector
Description
Cable Type
SATELLITE IN
Connects to the LNB on the Satellite Antenna.
Solid Bare Copper
RG-6 Coaxial
(75-ohm / F-type)
LOW SPEED DATA
Allows you to connect your Digital Satellite Receiver to new
technologies, as they are introduced. Additional accessories may
be required.
Depends on future
applications
(D-sub 9 pin)
VCR CONTROL
Sends IR signal from Digital Satellite Receiver to VCR. Allows
the Digital Satellite Receiver to automatically control your
VCR's recording functions when you record a program.
Audio mono
miniplug
AUDIO (R)/(L)
OUT
Connects your Digital Satellite Receiver to the right and left
audio inputs of your audio or video component.
Audio (2)
(RCA-type)
VIDEO OUT
Connects your Digital Satellite Receiver to your TV or VCR's
video input.
Video
(RCA-type)
S-VIDEO OUT
Allows you to connect your Digital Satellite Receiver directly
to your TV (if your TV has S-VIDEO IN).
S-Video
(4-pin mini DIN)
CH3/CH4 Switch
When you use an RE connection, this setting determines the
TV channel on which programs from the Digital Satellite Receiver
can be viewed.
VHF/UHF IN
Allows you to connect your Digital Satellite Receiver to your
normal (terrestrial) TV or cable TV service.
RG-59 Coaxial
(75-ohm/F-type)
VHF(SAT)/UHF OUT
Connects to your TV or VCR.
RG-59 Coaxial
(75-ohm / F-type)
TEL LINE
Connects your Digital Satellite Receiver to a telephone jack.
This allows you to order pay per view programs.
Telephone (RJ-11)
AC IN
Cormects your Digital Satellite Receiver to a 120V AC outlet.
AC
80