Sony SAT-A4 - Manual (Page 79)

Back Panel (SAT-A4)
Connector Description Cable Type
SATELLITE IN Connects to the LNB on the Satellite Antenna. Solid Bare Copper
RG-6 Coaxial
(75-ohm / F-type)
DIGITAL OUT Connects to the optical in jack on your Dolby Digital decoder or
Dolby Digital A/V receiver. Optical cable
LOW SPEED DATA Allows you to connect your Digital Satellite Receiver to new
technologies, as they are introduced. Additional accessories may be
required.
Depends on future
applications
(D-sub 9 pin)
VCR CONTROL Sends IR signal from Digital Satellite Receiver to VCR. Allows the
Digital Satellite Receiver to automatically control your VCR's
recording functions when you record a program. Audio mono miniplug
RF REMOTE Connects to the RF antenna. RCA-type
AUDIO (R)/(L)
OUT Connects your Digital Satellite Receiver to the right and left audio
inputs of your audio or video component. Audio (2)
(RCA-type)
VIDEO OUT Connects your Digital Satellite Receiver to your TV or VCR's video
input. Video
(RCA-type)
S-VIDEO OUT Allows you to connect your Digital Satellite Receiver directly to your
TV (if your TV has S-VIDEO IN).
S-Video
(4-pin mini DIN)
CH3/CH4 Switch When you use an RF connection, this setting determines the TV
channel on which programs from the Digital Satellite Receiver can be
viewed.
VHF/UHF IN Allows you to connect your Digital Satellite Receiver to your normal
(terrestrial) TV or cable TV service. RG-59 Coaxial
(75-ohm/F-type)
VHF(SAT)/UHFOUT Connects to your TV or VCR. RG-59 Coaxial
(75-ohm/F-type)
TEL LINE Connects your Digital Satellite Receiver to a telephone jack. This
allows you to order pay per view programs. Telephone (RJ-11)
AC IN Connects your Digital Satellite Receiver to a 120 V AC outlet. AC
79