Replacing your access card, To replace your access card – Sony SAT-A4 User Manual
Page 68
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Replacing Your Access Card
In the event that your program providers need to send you a new
access card, use the Access Card option to initialize your new card.
During this process, you'll follow the on-screen instructions to copy
information from the old card onto the new card. After you initialize
the new card, your old card becomes invalid.
To replace your access card:
1 Select ACCESS CARD from the Setup Menu.
SETUP MENU
REMOTE
CONTROL
1
ACCESS
CARD
2
VCR
RECORDING
3
ANTENNA
4
EXIT
5
ASPECT
RATIO 6
TROUBLE
SHOOTING
7
SYSTEM
TEST 8
TIPS AND
SHORTCUTS
9
2 When the Replace Access Card screen appears, insert your old
access card, if you removed it, as follows:
□ Slide the access card, arrow side up, into the slot located in the
rear of the Digital Satellite Receiver, as shown in the
illustration.
68