Inserting batteries into the remote control, To install the batteries, Notes on batteries – Sony SAT-A4 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting Batteries into the Remote Control
Before you can use the remote control, you must first insert the
supplied batteries. If you want to use this remote control to operate
c^her video components, such as a TV or cable box, you must also
program the remote as described in the Appendix on page 85.
To install the batteries:
1
Push and slide open the battery compartment.
SAT-A4 Remote Control:
SAT-B3 Remote Control:
2
Insert two size A A batteries (supplied). Be sure to match the + and
— marks on the batteries with the + and — marks in the battery
compartment.
Notes on Batteries
□ When the batteries become weak, the Function button indicator
flashes. If the remote control does not operate properly, the
batteries might be weak. When replacing batteries, replace both
batteries with new ones. Do not mix different types of batteries
together.
□ When you remove the batteries — to replace them, for example —
any codes you've set may be erased. If this happens, you must
reprogram the remote. See "Programming the Remote Control" on
page 85 for details.
□ When replacing the batteries, do not touch any butttms on the
remote control.