Using the remote control, Sat-a4 remote control – Sony SAT-A4 User Manual

Page 81

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Using the Remote Control

The

FUNCTION

buttons

flash

to

Indicate

xvhich component the remote control is set

to operate.

SAT-A4 Remote Control

Outside Panel (SAT-A4)

After you've installed the batteries and programmed the remote
control, use these procedures to operate your system components:

1- Select the component that you want to use: To operate a cable box,

TV, or the Digital Satellite Receiver, press the corresponding
FUNCTION button.

SAT-A4 Only:

To operate a VCR or laserdisc player, open the lid on

the remote control and set the slide switch to the position that you
set for the component.

2 Aim the remote control at the component.

3 Press the POWER button of the component to turn it on and off.

To control other functions of the component, see the table that follows.

Note

Buttons described in the following table can operate components other than the
Digital Satellite Receiver only if you've programmed the remote and the

component supports the function described. See page 85 for instructions on
programming the remote.

Button Operates

Description

MUTING

o

TV

Mutes the volume. Press again to restore the
volume.

SLEEP

TV

Automatically turns off the TV, after the time
period that you specify.

CARI F

POwfH —............. -

SAT

CABLE: Turns the cable box on and off.

--O

TV: Turns the TV on and off.

SAT: Turns the Digital Satellite Receiver on and
off.

FUNCTION ------ CABLE T\' SAT

(o o o)

CABLE: Puts the remote in cable mode. In cable
mode, the remote operates your cable box.

TV: Puts the remote in TV mode. In TV mode, the
remote operates your TV.

SAT: Puts the remote in SAT receiver mode. In
SAT mode, the remote operates your Digital
Satellite Receiver. To switch from the TV to SAT
mode, press the SAT FUNCTION button, and
then press the TV/SAT button.

POSH ION

AUDIO SWAP PIP

O

CO

C_)

CH OFF

Q CD

Only works with Sony TVs.

POSITION: Changes the PIP position.

AUDIO: Swaps the audio between PIP and the

main picture.

SWAP: Swaps the PIP picture and the main

picture.

+/-:

Changes the PIP channel.

PIP: Turns PIP on.

OFF: Turns PIP off.

81

Advertising