Compaq P5000 Series - Manual (Page 150)

150
Chapter 7 Using the RibbonMinder
Using the RibbonMinder
This chapter outlines how to configure the RibbonMinder each time you
change your ribbon, as well as how to set the options available with the
RibbonMinder feature.
Configuration
This section explains how to unlock the ENTER key, find the RibbonMinder
options, make changes, exit the configuration menu, and lock the ENTER
key.
Following this section are procedures for changing each RibbonMinder
option. To avoid repetition, references are made to Table 20 for entering the
configuration menu.
NOTE: All RibbonMinder options are automatically saved in NVRAM when
selected.
As you perform the following steps, refer to the RibbonMinder menu diagram
shown in Figure 48.
Figure 48. RibbonMinder Menu Diagram
RIBBON
MINDER
New Ribbon Ribbon Action Ribbon Size RIbbon Adjust Ribbon Fault
Press ENTER
to reset ribbon
life to 100%. A
new ribbon
must be
installed after
setting the
ribbon life to
100%. Disable*
Display
Fault Press = or > to
increase or
decrease size.
60 yards*
(1-255)
Default is 100
yards for
cabinet model.
Press = or > to
increase or
decrease.
0*
(-99% to 99%)
New Ribbon*
Do Nothing
* = Factory Default
To view options, press: > Down
= Up
< Next
; Prev
To select an option, press ENTER.
To return to main menu, press
CLEAR.
To exit menu, press ONLINE.
* = Default Setting