Compaq P5000 Series - Manual (Page 95)

Submenu
95
SFCC & Pwrup
This option has several suboptions which define the SFCC and power-up
configuration used with IGP/VGL.
SFCC
This option selects the Special Function Control Code. The default value is
the caret ^ (decimal 94). Valid values are 17 through 255. Throughout this
section, the ^ is used as the SFCC. Run a configuration printout to determine
the currently selected SFCC.
Power Up ^X
• Disable. The default.
• Enable. Selects the ignore mode as the power-up default, and selects the
graphics mode ^PY as the power-up default. All characters are ignored
until a ^A command is received.
Graphics
Options
(from page 94)
Slash 0 Ignore Dots Append
Rotated Truncate Alpha True Vert 1/10 Absorb After
^PY
UPC
Descenders
Rot. Char Size Ignore Spaces Midline PY Dark Barcode Width Limit
Disable*
Enable Disable*
Enable Disable*
Enable Enable*
Disable Disable*
Enable Absorb Motion*
Absorb All
Disable
Enable*
Disable Adjusted*
Not Adjusted Disable*
Enable Disable*
Enable Disable*
Enable Disable*
Enable
* = Factory Default
Absorb After
^PN
IGP 110
Compatbl.
Disable*
Enable Disable*
Enable