Compaq P5000 Series - Manual (Page 69)

Configuration Main Menu
69
Figure 44. Configuration Menu Overview (continued)
HOST
INTERFACE
(see page 103)
PRINTER
CONTROL
(see page 112)
RIBBON
MINDER
(see page 117)
Serial*
Interface Type
RS-232*/RS-422
Data Protocol
XON/XOFF*
ETX/ACK
ACK/NAK
DTR
Baud Rate
600, 1200, 2400
4800, 9600*,
19200, 38400
57600, 115200
Word Length
8* or 7
Stop Bits
1* or 2
Parity
None*, Odd
Even, Mark
Sense
Data Term Ready
True*
On-Line and BNF
Off-Line or BF
False
Request to Send
True*
On-Line and BNF
Off-Line or BF
False
Buffer Size in K
8* (1-16)
Unidirectional
Disable*
Enable
PMD Fault
Enable*
Disable
Slow Paper Slew
Disable*
Enable
Power Saver Time
15 min.*
(15-60 min.)
New Ribbon
Ribbon Action
Disable*
Display
Fault
Ribbon Size
100 yards*
(1-255 yards)
Ribbon Adjust
0*
(-99% - 99%)
Fault Action
New Ribbon*
Do Nothing
DIAGNOSTICS
(see page 114)
Printer Tests
Shift Recycle*
All E’s
E’s + TOF
All H’s
All Underlines
All Black
Shuttle Slow
Shuttle Fast
Shuttle Only
Phase Printer
Paperout Adj.
Burnin Test
Print Error Log
Clear Error Log
Test Width
Full Width*
80 col.
Paper Out Dots
40 dots*
(4-76 dots)
System Memory
x Megabytes
Print Statistics
On xx Hrs.
Print xx Hrs.
Print Strokes
Print Lines
11 Inch Pages
Parallel
Centronics
Data Bit 8
Enable*/Disable
Data Polarity
Standard*/Inverted
Strobe Polarity
Standard*/Inverted
Resp. Polarity
Standard*/Inverted
Busy On Strobe
Enable*/Disable
Latch Data On
Leading*/Trailing
Prime Signal
Enable*/Disable
TOF Action
Reset*/Do Nothing
Buffer Size in K
8* (1-16)
Dataproducts
Data Bit 8
Enable*/Disable
PI Ignored
Enable*/Disable
Data Polarity
Standard*/Inverted
Data Request Pol.
Standard*/Inverted
Strobe Polarity
Standard*/Inverted
Buffer Size in K
8* (1-16)
Bidirectional
Buffer Size in K
8* (1-16)
To view options, press:
⇓
Down
⇑
Up
⇒
Next
⇐
Prev
To select an option, press ENTER.
To return to main menu, press
CLEAR.
To exit menu, press ONLINE.
* = Default Setting