Compaq P5000 Series - Manual (Page 89)

Submenu
89
IGP/PGL Emulation
The IGP/PGL emulation can be configured either through the printer’s front
panel or from the host computer with control codes. For a detailed description
of configuration with control codes, see the DEC LG Emulation IGP/PGL
Programmer’s Reference Manual. For information on configuring the
emulation through the printer’s front panel, see the submenu below and the
parameter descriptions that follow.
Submenu
EMULATION
(from page 73)
Define CR
Code
Define LF
Code
Autowrap Select SFCC PI Slew Range CR Edit
Select Font Select LPI Auto
Uppercase
Skip Cmd
Prefix
Power On
IGP/PGL
CR = CR*
CR = CR + LF LF = LF*
LF = CR + LF Disable*
Enable 126*
(1-255) 16*
15 Disable*
Enable
0-33 6*
8, 9, 10 Disable*
Enable Enable*
Disable Enable*
Disable
* = Factory Default
Ext Execute
Copy
UPC
Descenders
Compressed
CPI
Ignore Char IGP100
Compatbl.
Disable*
Enable
Always*
Never
Only with PDF Disable*
Enable Ignore Mode
Disable*
Enable
Select Char
0*
(0-255)
Disable*
Enable
Optimized
Ratio
Disable*
Enable
IGP/PGL