Compaq P5000 Series - Manual (Page 48)

48
Chapter 2 Install Basic Components
Test the Printer
Table 3. Printer Test Procedure
Step Key Result Notes
1. Make sure that the printer top cover is open and the forms thickness lever is lowered.
2. The printer must be off line for
testing.
3. Allows you to make configuration
changes.
4.
5.
6.
7. The printer outputs a sliding
alphabet pattern.
8. Stops test.
9. Locks the configuration
parameters.
10. Moves the printer out of the
menus to offline.
11. Examine the print quality. The characters should be fully formed and of uniform
density. If the test does not run or characters appear malformed, contact your
authorized customer service engineer.
12. If the print quality is good, close the printer cover; press ONLINE to enable printing. To
select an emulation and configure the printer with the control panel, go to Chapter 3.
ONLINE
OFFLINE
CONFIG. CONTROL
+
ENTER SWITCH
UNLOCKED
OFFLINE
CONFIG. CONTROL
UNTIL OFFLINE
DIAGNOSTICS
DIAGNOSTICS
Printer Tests
Printer Tests
Shift Recycle*
R/S
Printer Tests
Shift Recycle*
R/S
Printer Tests
Shift Recycle*
+
ENTER SWITCH
LOCKED
CLEAR
OFFLINE
CONFIG. CONTROL