Rx settings – Canon B550 User Manual
Page 101
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Settings
RX SETTINGS
Factory sellings are in bold. For instructions on how to change a setting, refer to Flow to ehange a setting.pgs.8.v86.
Name
Description
Settings
ECM RX
Enable/disable error correction during reception.
ON/OFF
FAX/TEL SWITCH
Enable/disable FAX/TEL switchover. When ON, this feature
answers calls, and if no fax tone is detected, the FAXPHONE
rings to alert you of an incoming calf
ON/OFF
RING START TIME
Set the duration that the FAXPHONE listens for a fax tone before
starting to ring.
8
seconds(0 to 30)
F/T RING TIME
Set the length of time the FAXPHONE will ring to alert you of an
incoming call.
15seconds|10to 45)
F/T SW ACTION
Select the action taken after the F/T RING TIME expires.
DISCONNECT/RECEIVE
INCOMING RING
When the FAXPHONE is set for automatic receiving, set the
FAXPHONE to ring when it receives a calf
ON/OFF
RING COUNT
Set the number of incoming rings before the FAXPHONE
answers.
2
times) 1 to 99)
ANS/FAX SWITCH
Enable/disable whether the EAXPHONE automatically switches
to receive mode If a period of silence is detected after
answering the call.
ON/OFF
ANS/FAX SW TIME
Set the duration of silence the FAXPHONE listens for to
determine if a fax is coming in.
4
seconds! 1 to 60)
MAN/AUTO SWITCH
Determine if the FAXPHONE switches to document receive
mode after the FAXPHONE rings for a specified time when the
FAXPHONE is in the manual receive mode.
ON/OFF
RING TIME
Set the amount of time the FAXPHONE will ring before
switching to document receive mode.
10
secondsll to 99)
REMOTE RX
Allow you to dial a number code on the remote extension to
start receiving a document.
ON/OFF
REMOTE RX ID
If you set REMOTE RX ON, you can change the remote receiving
ID,
25
(00 to 99, * and #
included)
MEMORY RX
Turn on/oft memory receiving of a document.
ON/OFF
RX PAGE FOOTER
Set the F/AXPHONE to print the time a document is received, the
transaction number, page numbers, and other useful information.
If you set RX PAGE FOOTER ON, SELECT REDUCE % setting in
RX REDUCTION is set to 90% automatically.
ON/OFF
DRPD
NORMAL RING
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
Enable/disable the Dustinctive Ring Pattern Detection (DRPD)
feature and assign a setting mode to each ring pattern.
See pg.21.
ON/OFF
TEL-FAX-FAX/TEL SWITCH
TEL FAX
FAX/TEL SWITCH
TEL-FAX-FAX/TEL SWITCH
TEL-FAX-FAX/TEL SWITCH
TEL-FAX-FAX/TEL SWITCH
|g
oo
3]
S
89