Dial the other party's fax numher, Press [start/copy, J~c9i – Canon B550 User Manual

Page 88

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Dial the other party's fax numher.

See Dialing methods. pg..>.S.

Make sure there is no doenment loaded in the

doeunient feeder.

j~C9i

Press [START/COPY],

Polling reception starts.

START/COPY

TEL=

4451551

TX/RX NO.

xxxx

The FAXPHONE beeps once to indicate that the document has been received suc-

cessfulK.

If an error occurs during reception the FAXPHONE beeps intermittently for ;i few

seconds. If this happens, try polling the fax again.

The FAXPHONE automatically redials if the other fax machine docs not answer or

if the line is busy. (You can specify the number of times it redials; see AUTO RE­

DIAL In TX SETTINGS, pg.88.)

To stop polling before the fax is finished, press |STOP).

If the ALARM light is flashing for any reason, correct the problem and then press

|STOP|. Ifneeessary. refer to Troubleshooting, pg.104.

You can request up to 71 locations to send you a fax using this feature

and Sequential broadcasting. Sec Sequential broadcasting, pg.66.

You can use polling reception with multiple parties, us long as each

party uses the same polling ID.

76

Advertising
This manual is related to the following products: