AVer System Contrll Pro User Manual (NV version) - Manual (Page 41)

35
2.10.2 Camera Setup
In Camera setup, user can enable/disable the camera, enable/disable camera video to be display
on the screen, adjust contrast/brightness/saturation/hue, enable/disable de-interlace, and
enable/disable relay of the IP camera.
Enable a Camera
1. First, select the camera to configuration.
Please refer to Chapter 2.4 .
2. At main menu screen, press the
button to enter Camera Setup screen.
3. In Camera Setup screen, press
button to enter Camera Enable screen.
4. To enable the camera for viewing and
recording, press button. Press
button to disable the camera.
When the camera has been disabled, the
camera video can
’t be view and record.
5. When user sees the “Complete”
message, it means the operation is done.
6. To go back to the Camera setup screen,
press BACK button. To go back to the
main menu screen, press TOP MENU
button.