AVer System Contrll Pro User Manual (NV version) - Manual (Page 64)

58
2.11.2 Camera Setup
In Camera setup, user can enable/disable de-interlace function.
i
Camera Enable ( ), Display ( ), Attribute ( ), and IP-CAM Output
function ( ) are not supported.
Enable the De-interlace
1. At main menu screen, press the
button to enter Camera Setup screen.
2. In Camera Setup screen, press
button to enter De-interlace screen.
3. In De-interlace screen, press 1 button to
if you are capturing motionless picture.
Press 2 button if it captures lots of
movement. To disable de-interlace, press
OFF button.
4. When user sees the
“Complete”
message, it means the operation is
done. To go back to previous menu
screen, press BACK button. To go back
to main menu, press TOP MENU.