AVer System Contrll Pro User Manual (NV version) - Manual (Page 76)

70
Chapter 3 Operating in PTZ 485 Mode
The PTZ 485 mode is to control the PTZ camera that is directly connected with System Controller
through the RS485 port.
i
To operate PTZ camera, please refer to Chapter 2.9 .
3.1 Switching to the PTZ 485 Mode
Before starting to operate the PTZ camera, please switch to the PTZ 485 mode.
i - The default mode is USB DVR mode
- The USB CMS and 485 DVR mode is not supported in current version.
- If System Controller is connecting with DVR system, please refer to Chapter 2 for
operation description.
1. In main menu screen, press button to enter Controller setup screen.
2. Press button to enter Mode setup screen.
3. In Mode setup screen, press button to switch the mode to 485 PTZ mode.
i
If the password function is enabled, user needs to enter the password for mode
switching.