Enable/disable code number display, Operation mode selecting, Enable/disable button confirmation – AVer System Contrll Pro User Manual (NV version) User Manual
Page 60
Advertising
54
Enable/disable Code Number Display
1. At main menu screen, press the
button to enter Controller setup screen.
2. Press
button to enter LCD setup
screen.
3. Press
button to enter the Code
number setup screen.
4. Press
button to enable the code
number display. Press
button
again will disable the code number
display.
5. Press
button to confirm the
setting. To cancel, press
button.
Operation Mode Selecting
System Controller supports USB DVR and 485 DVR mode for NV DVR server. User can depend on
the way of connection to select operation mode. Please refer to
for
details.
Advertising