AVer System Contrll Pro User Manual (NV version) - Manual (Page 9)

3
1.1.3 Familiarizing with System Controller Panel Buttons
System Controller Panel figure
Function Description
(1) (Lock)
To lock panel buttons and all operations are lock. Press it to lock and
press again to un-lock. If the system password has been set, please
enter the password to un-lock (see also
Chapter 2.5 )
(2) (Power) Lights up when unit is power on.
(3)
(Panic Button)
To trigger the alarm buttons that user has defined (see also Chapter 2.6 ).
To setup alarm button, please refer to Chapter 5.9 step 5 of NV User ’s
Manual. If the alarm button hasn ’t been defined, there is no any action
when alarm button is selected to trigger.
(4) Playback Control
Buttons
(Jog/Shuttle)
Enable/disable the jog/shuttle function. When
button lights up is enabling.
(Pause) To pause the playback.
(Play) To switch to playback mode and start playback.
(Jog/Shuttle)
- Jog dial (top part): Playback video frame-by-
frame that control by user.
- Shuttle ring (lower part): Playback video at
faster forward or rewind speed that control by
user.
(5)
(Alarm Log)
To call out the alarm log window. To close alarm log window, press the
button again.