3 setup the baudrate of the ptz camera, 3 setup the baud rate of the ptz camera – AVer System Contrll Pro User Manual (NV version) User Manual
Page 79
Advertising
73
3.3 Setup the Baud Rate of the PTZ Camera
Selecting the baud rate of the PTZ camera.
1.
In 485 PTZ mode menu screen, press
button to enter the Protocol setup screen.
2.
In Baudrate setup screen, press baudrate button and press
button to confirm. To
cancel the selection, press
button. When the
“Complete” message appears on the
LCD screen, the mode switch is completed.
Advertising