2 select the protocol of the ptz camera – AVer System Contrll Pro User Manual (NV version) User Manual
Page 78
Advertising
![background image](/manuals/634476/78/background.png)
72
3.2 Select the Protocol of the PTZ Camera
Selecting the PTZ camera
– Pelco-P or Pelco-D.
1.
In 485 PTZ mode menu screen, press
button to enter the Protocol setup screen.
2.
In Protocol setup screen, press
button to select the protocol. And then, press
button to confirm. To cancel the selection, press
button. When the
“Complete”
message appears on the LCD screen, the mode switch is completed.
Advertising