AVer System Contrll Pro User Manual (NV version) - Manual (Page 44)

38
Adjusting the Saturation
1. First, select the camera to configuration.
Please refer to Chapter 2.4 .
2. At main menu screen, press the
button to enter Camera Setup screen.
3. In Camera Setup screen, press
button to enter Attribute screen.
4. In Attribute screen, press button
to enter the Saturation adjustment
screen.
5. In Saturation adjustment screen, enter
the value number (Range is 0~ 100).
After value has entered, press Enter
button to confirm.
6. When user sees the
“Complete”
message, it means the operation is
done.
7. After complete the adjustment, the value
of hue will be display on the LCD screen.
To go back to previous menu screen,
press BACK button. To go back to main
menu, press TOP MENU.