Detex DTX-2300 - Manual (Page 28)

Prox.pad Installer Guide
Document # 6-055678 X2 Page 28 of 32
Secured Series Front End Mode LED Indicators/Sounder
LED/Sounder Visual/Audible Condition Description
Yellow LED
Slow blink Unit is in program mode
Rapid blink
Verify mode is active (checking that the last two values in sequence
match)
Steady Program error; entry error lockout (no keypress feedback)
Very rapid blink Memory (eeprom) erase is in progress (command 46)
“Pulsing” rapid blink
Batch program of cards in progress (command 56); block delete of
users (command 58)
Bi-color LED
Steady red Lock is locked
Steady green Lock is energized (timed or latched)
Quick double red/green fl ash Prox card read correctly
All LED's
Rapid red, yellow, green
sequencing
Power on/reset
Sounder
(system)
Very quick beep (10 ms) with
yellow LED blink every second EEPROM read error during get system parameters; can be turned
off by running self-test
3 slow beeps (250 ms) Indicates self test
Sounder (after
PIN)
3 rapid beeps after PIN not found
Sounder (after
card)
3 very rapid beeps
PIN not found, facility code/company ID mismatch and access by
facility mode enabled; incorrect card type (option #20)
1 short beep Valid card access
Secured Series Front End Mode Default Settings
Option Default Setting Option Default Setting
Master Code 1234 Audio Keypress Feedback Enabled
Visual Keypress Feedback Enabled Auto-Entry Disabled
Anti-Passback Enabled Reader In/Out Select In
Keypad In/Out Select In Prox Card Type 26-bit
Facility Match Required Disabled Facility Code 1
Corporate 1000 ID 4095