Detex DTX-2300 - Manual (Page 5)

Prox.pad Installer Guide
Document # 6-055678 X2 Page 5 of 32
prox.pad Specifi cations
Electrical
Power Supply/Current Requirements 10-15 VDC, linear fi ltered and regulated power supply; 55mA
Wiring
Remote Antenna Cable (if installing in a
secured confi guration) [ALPHA 1294C (22AWG) 4-conductor, stranded and shielded]
Wiegand Interface Guide [ALPHA 1295C (22AWG) 5-conductor, stranded and shielded]
Secured Series Front End Cables [ALPHA 1295C (22AWG) 4-conductor, stranded and shielded]
Power Supply Cable 18AWG - 22 AWG 2-wire stranded (depends upon distance)
Door Lock Cable 18AWG - 22 AWG 2-wire stranded (depends upon distance)
Door Monitor Cable 18AWG - 22 AWG 2-wire stranded (depends upon distance)
REX Cable
[ALPHA 2421C 18 AWG or ALPHA 1292C 22 AWG, 2 conductor,
stranded and shielded] (if using remote switch)
Mechanical
Height 5.25 in (13.3 cm)
Width 2.75 in (7 cm)
Depth 1.375 in (3.5 cm)
Relay Outputs
Main Relay Form C (switches up to 2A)
Program for either timed (1-99 sec) or toggle
Aux Relay Form C (switches up to 1A)
One of three functions can be programmed: Alarm Shunt Relay,
Forced Door Relay, or Propped Door Relay
Monitor Inputs
Door Position Switch Normally Closed, Dry Contact
Other Outputs
Sounder 4000 Hz, defeatable
Bi-Color LED Red/Green
Yellow LED
Compatible Proximity Cards (All HID cards up to 40 bits, including the following)
Prox Card II
IsoProx II
DuoProx II
Proxkey FOB
Specifi cations continued on next page.