Non-boresight function, Positioning controller (required), Standard configuration – ETS-Lindgren 2171B Boresight Antenna Tower User Manual
Page 11
Introduction
|
11
N
ON
-B
ORESIGHT
F
UNCTION
Positioning Controller (Required)
A positioning controller, such as the ETS-Lindgren EMCenter
™ Modular
RF Platform (with EMControl
™ Positioner Controller Plug-In Card) or Model 2090
Multi-Device Controller, is required for operation, and is sold separately. Contact
ETS-Lindgren for ordering information.
Existing ETS-Lindgren positioning controllers can be used with the
Model 2171B/2170B; contact ETS-Lindgren to confirm your controller is installed
with the required firmware. The Model 2090 requires firmware revision 3.21 or
higher.
Standard Configuration
Tower Assembly: Single-piece mast, castered base, carrier assembly
Links: Non-boresight and 3-, 5-, and 10-meter for boresight
Variable Speed Motor
Boresight with Centerline Pneumatic Polarization: with adjustable rotational
velocity
Infrared (IR) Remote Controller (see page 47)